Series ballasts: Handle parts with care and attention
Trend in the market, both for aesthetics and finish as well as for maintenance and durability, ballasts require greater care in handling and, of course, in the settlement.
Because of this, we made a series of special materials for you, who have doubts about the subject. In the last two contents, We cover tips for laying (read here) and for drilling and cutting the plates (on here). Now, we go into the detail of handling.
Products: Apuan Gray AC 120x240cm; Sequoia Mel AC 19x90cm; Unique White PO 120x240cm; Stelar White NA 80x80cm.
Read the text and find out the best way to move them, guaranteeing the integrity and functionality of the ballasts!
– Firstly, don't forget that, to move them location, it is necessary, not minimal, two people.
– For this move, try to use appropriate tools, that convey stability and security to the plates, since its shape and thickness require extra care. Raimondi, Sigma and Rubi are the world's leading suppliers of these tools. In Brazil we have Cortag, also a reference on the subject.
– Lifting and positioning of weights on the ground must be done on wooden supports, always horizontal. It is worth remembering that the distance between the supports must be approximately 100 centimeters.
– When you lean them against the wall, the ballasts must be at an angle of approximately 25 How to make a porcelain tile staircase in.
– To transport them from one floor to another, going up or down stairs, Ideally, each person should carry, no maximum, 23 kilos.
– The entire process must be done with great attention and care., with movements executed in common agreement between operators. Only in this way will the work be completed in the best way possible..
Now, since you read about the movement of plates, How about understanding the best ways to handle ballast boxes?? This is the subject we will cover in the next content here on the blog., closing the series on large formats. Don't forget to follow!
Also access the video on the subject:
Back
